Bladder water storage tanks from Wet Earth
Australian made with a full 10 year warranty. Some of the characteristics of our
irrigation bladder tanks are;
- Australian made.
- 10 year warranty.
- Suitable for storing water for irrigation or pool filling.
- Algae resistant.
- Guaranteed not to leak and not to rust.
- Pressure tested.
- Manufactured from high quality 980gsm reinforced flexible PVC.
- Non-elastic walled.
- Dark green/blue or black in colour.
- Self supporting so no need for a frame.
- UV stabilised.
- Ideal underhouse tank or as a tank under a verandah.
- Made to order so customisable.
The quoted lengths and widths of our bladder water tanks are the dimensions when the tanks are empty.
The bladder water tanks will get narrower and shorter as they fill. The quoted height is what the
bladder tanks will reach under gravity fed stormwater. The height of the bladder water tanks can also
be limited see our bladder tank installation guide. The required clearance above the tank is 30mm
(3cm). The quoted volume is the volume when the bladder tank reaches its quoted height.
Bladder water tanks come with three 50mm male threaded connections (inlet at one end and an outlet
at both ends of the tank). They also have a 15mm barbed connection in the middle at the top which
behaves as an air relief valve. Bladder water tanks are also supplied with an appropriate sized
geotextile ground sheet for the tank.
For further information contact:
Wet Earth
phone: 02 6009 0911
fax: 02 6100 9271
web: www.wetearth.com.au
|
