Envirofan damp solutions via subfloor ventilation
Left, 240 volt. Right, Envirofan's 12 volt.
Envirofan has provided damp solutions since 2001. It predecessor Solarfan
provided damp solutions since the 1970's. How did they do this? Damp solutions is achieved
mainly in the design of their subfloor ventilation systems and in the installation of their
units.
Installation and Design
Envirofan has the direct approach in providing damp solutions. How can we say that? Simply
put, damp solutions is provided by the installation of the Envirofan subfloor ventilation
system where the damp or problem area is. In its design stage these subfloor ventilation
systems are brick size which means they can be installed in areas where there is a reduced
clearance between the ground and the floor joists. Where subfloor ventilation would be
extremely lacking in this space, damp solutions is achieved by extricating a brick and installing
the fan-forced ventilation system in its place. Simple!
In this same scenario ventilation companies that use 240v in-line fan systems would install
150mm flexi duct in this area to draw the damp humid air into the duct work providing their
version of damp solutions. This means that air has to flow around this obstacle before it is
drawn into the ductwork and extracted to the outside.
Which damp solution seems simpler to you?
If subfloor ventilation problem exist somewhere near a passive vent, damp solutions can be
achieved by removing the vent and replacing it with Envirofan terra-cotta vent size ventilation
system. This changes the ventilation properties from passive to active.
Are 12 volt subfloor ventilation systems powerful enough to provide
damp solutions?
The correct answer to this question is dependant on who you ask. If this question was posed to a
company that installs 240 volt system they would most likely say, No! This would be an obvious
answer as they have there own agenda.
There is no issue if low voltage subfloor ventilation systems can provide an effective damp solution
as there are thousands of clients who can attest to the fact that they work and get the desired
result, therefore damp solutions is achieved. As a comparison it would take two Envirofan units to
equal a 240 volt in-line systems.
On this par Envirofan would do it better in that it would take 80% less power and would it half as
quietly. Does Envirofan subfloor ventilation systems provide effective damp solutions. There is no doubt!
For further information contact:
Envirofan
phone: 0421 984 202
web: www.envirofan.net.au
|
